-
Specifications
| Physical properties |
| Primary colour |
Blue |
| Additional colours |
Yellow,Grey |
| Weight unit |
745 g |
| Material |
Plastic + PS/LED |
-
Specifications
- breadboard dimensions: 80 x 60mm / 3.15″ x 2.36″
-
Specifications
- contains: 2 motors, 3 set gears, metal shafts, gear box and other accessories
- motor: 3 VDC / 12500 rpm
- gear ratio:
- 1:60: 200 rpm output
- 1:120: 100 rpm output
- 1:288: 42 rpm output
- power supply: 2 x 1.5 V AAA or 2 x 1.5 V AA (not incl.)
-
Specifications
- servo motor connector shield (VRSSM):
- compatible with ARDUINO-UNO-R3: ARDUINO UNO REV.3 and ARD-A000067: ARDUINO MEGA2560 REV3 (required but not included!)
- ARDUINO-UNO-R3: ARDUINO UNO REV.3 can drive max. 12 servo motors
- ARD-A000067: ARDUINO MEGA2560 REV3 can drive max. 36 servo motors
- IR receiver
- beeper
- power indicator LEDs
- battery shield (VRBS1):
- power supply: 12 V booster for Arduino board (4 x AA batteries, alkaline or NiMH recommended but not incl.)
- ON-OFF switch
-
Specifications
- range: 20 … 250cm
- frequency: 40kHz
- digital output: 5V (50mA max.)
- analogue output: 0…5V (5mA max)
- buzzer output: 12V (100mA max.)
- relay contacts: 1A low voltage NO/NC
- power supply: 12VDC
- current consumption: 200mA max.
- dimensions: 110 x 50 x 18mm / 4.3 x 2.0 x 0.7″
-
Specifications
- range: -20° ~ +70°C
- output: 0 ~ 20mA current loop
- output voltage compliance: 10V
- accuracy: 2° full range
- one single adjustment
- 3-wire system: GND, +V and OUT
- power supply: 12VDC for 0 ~ 5V OUT / 15VDC for 0 ~ 10V OUT
- current consumption: 30mA max.
- dimensions: 55 x 35 x 15mm / 2.2 x 1.4 x 0.6″
-
Specifications
- power supply: 12 VDC (100 mA max.)
- relay output: 8 A / 250 VAC max.
- minimum event time : 100 ms
- maximum event time: 1000 h (over 41 days)
- dimensions: 68 x 56 x 20 mm (2.6″ x 2.2″ x 0.8″)
-
Specifications
- 5 digital inputs (0= ground, 1= open) (on-board test buttons provided)
- 2 analogue inputs with attenuation and amplification option (internal test +5V provided)
- 8 digital open collector output switches (max 50V/100mA) (on-board LED indication)
- 2 analogue outputs:
- 0 to 5V, output resistance 1K5
- PWM 0 to 100% open collector outputs max 100mA / 40V (on-board LED indication)
- general respons time: 2ms per command
- power supply: through USB approx. 70mA
- dimensions: 110 x 80mm / 4.3 x 3.2″
