-
Specifications
- power supply: 4 x AA batteries (LR6C not incl.)
- weight: 425g
- number of pieces: 148
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: luminous
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: purple
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: yellow
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
Specifications
- regulated power supply: 9VDC (not incl.)
- power consumption: 300mA max.
- dimensions: 110 x 110 x 150 mm / 4.33 x 4.33 x 5.9″
-
Specifications
- WS2812S LEDs
- power supply: 5 VDC
- current consumption: 3,5 A / panel max.
- dimensions: 72 x 72 x 3 mm (2.8″ x 2.8″ x 0.1″)
- LED pitch: 9 mm (0,35″)
-
Specifications
- music power output: 7W / 4ohm
- RMS output: 3.5W / 4ohm or 2W / 8ohm
- total harmonic distortion: 0.05% (1W / 1kHz)
- frequency response: 20Hz to 20kHz (-3dB)
- signal/noise ratio: 86dB (A weighted)
- input sensitivity: 40mV / 150Kohm
- overload and short-circuit protected
- supply voltage: 15VDC (8 to 18VDC possible) / 0.5A
- dimensions: 55 x 35mm / 2.2 x 1.4″
-
Specifications
- TRANSMITTER:
- power supply: 3 AAA batteries (not incl.) (option: TR-G3/8)
- 433 MHz operation
- 8 digitally encoded channels
- rubber keypad
- LED function/mode indication
- dimensions: 150 x58 x 23 mm
- FCC approved ID code: NLO8058
- RELAY RECEIVER CARD:
- 8 high-quality relay contacts, 5A/230Vac max.
- relay outputs are transient suppressed using VDR’s
- LED confirmation on each relay contact
- input power: 12 Vac / 500 mA
-
Specifications
- power supply for relays: 9-10Vac or 12 to 14Vdc (500mA), example: PS1205
- 8 high-power relays: 16A each (resistive load)
- dimensions: 160 x 107 x 30mm / 6.3 x 4.2 x 1.2″
-
Specifications
- power supply for relays: 9-10Vac or 12 to 14Vdc (500mA), example: PS1205
- 8 high-power relays: 16A each (resistive load)
- dimensions: 160 x 107 x 30mm / 6.3 x 4.2 x 1.2″
-
Specifications
- relay power rating: 24VDC/AC 3A
- power supply: 12VDC / 150mA
- with DC adapter socket
- dimensions: 79 x 73 x 22mm / 3.1 x 2.9 x 0.9″
-
Specifications
- 200W music power @ 4 ohm load
- 100Wrms power @ 4 ohm load
- 70Wrms power @ 8 ohm load
- distortion: 0.02% @ 1KHz/10W
- damping factor: >800
- frequency response: 3Hz to 20KHz (-3dB)
- sensitivity: 0.6Vrms
- signal to noise ratio: 115dB
- power supply: 2 x 25-30Vac / 120VA
- PCB dimensions: 107x62mm (approx.)
- recommended heatsink: HSVM100: HEATSINK FOR K8060 (pre-drilled) or S44/75 (not drilled)
- recommended power transformer:
- 230VAC input, 2 x 30VAC output: 12030
- 115 / 230VAC input, 2 x 25VAC output: TR8040 (output power reduced by ±15%)
