-
ULTRASONIC RADAR MODULE
Specifications
- range: 20 … 250cm
- frequency: 40kHz
- digital output: 5V (50mA max.)
- analogue output: 0…5V (5mA max)
- buzzer output: 12V (100mA max.)
- relay contacts: 1A low voltage NO/NC
- power supply: 12VDC
- current consumption: 200mA max.
- dimensions: 110 x 50 x 18mm / 4.3 x 2.0 x 0.7″
-
UNIVERSAL TEMPERATURE SENSOR
Specifications
- range: -20° ~ +70°C
- output: 0 ~ 20mA current loop
- output voltage compliance: 10V
- accuracy: 2° full range
- one single adjustment
- 3-wire system: GND, +V and OUT
- power supply: 12VDC for 0 ~ 5V OUT / 15VDC for 0 ~ 10V OUT
- current consumption: 30mA max.
- dimensions: 55 x 35 x 15mm / 2.2 x 1.4 x 0.6″
-
UNIVERSAL TIMER MODULE WITH USB INTERFACE
Specifications
- power supply: 12 VDC (100 mA max.)
- relay output: 8 A / 250 VAC max.
- minimum event time : 100 ms
- maximum event time: 1000 h (over 41 days)
- dimensions: 68 x 56 x 20 mm (2.6″ x 2.2″ x 0.8″)
-
USB INTERFACE CARD
Specifications
- 5 digital inputs (0= ground, 1= open) (on-board test buttons provided)
- 2 analogue inputs with attenuation and amplification option (internal test +5V provided)
- 8 digital open collector output switches (max 50V/100mA) (on-board LED indication)
- 2 analogue outputs:
- 0 to 5V, output resistance 1K5
- PWM 0 to 100% open collector outputs max 100mA / 40V (on-board LED indication)
- general respons time: 2ms per command
- power supply: through USB approx. 70mA
- dimensions: 110 x 80mm / 4.3 x 3.2″
-
USB PIC PROGRAMMER AND TUTOR BOARD
Specifications
- experiment module can be powered via USB
- power output to target is supported
- indicator LEDs for power supply and programming mode
- dimensions:
- programming and learning module: 90 x 74 mm / 3.54 x 2.91″
- programmer only: 34 x 74 mm / 1.34 x 2.91″
-
VERTEX NANO ASSEMBLED 3D PRINTER
Specifications
- printing:
- print technology: Fused Filament Fabrication (FFF)
- layer resolution: standard: 0.1 mm (maximum: 0.2 mm – minimum: 0.05 mm)
- build plate: 80 x 80 mm
- build volume: 80 x 80 x 75 mm / 3,15 x 3,15 x 2,95″
- build plate surface: Metal plate with BuildTak™ (consumable; also sold separately)
- print speed: 40mm/s
- travel speed: 70mm/s
- filament diameter: 1.75 mm
- prints: PLA, ABS (testing with other materials in progress)
- maximum nozzle operating temperature (extruder location: back): 245 °C
- maximum nozzle operating temperature (extruder location: front): 260 °C
- software:
- firmware: Modified Open Source Marlin 3D Printer. Firmware – user upgradable
- software: Repetier – CuraEngine – Slic3r (RepRap compatible)
- hardware:
- dimensions: 230 x 150 x 160 mm / 9 x 5,9 x 6,3″
- frame: sturdy, metal frame
- weight: 2.3 kg / 5 lb
- average noise level during operation: 45dB(A)
- ambient operation temperature: max 25 °C
- storage temperature: – 10 °C to + 40 °C
- electrical:
- communication: an SD card for direct printing and a USB connection for updates
- controller board: AVR ATmega2560 based
- display: 4 x 20 char. blue LCD with white backlight
- AC input: 100-240 V~, 50/60Hz
- LED illuminated logo
- printing:
-
VERTEX ORIGINAL 3D PRINTER
Specifications
- Printing:
- print technology: Fused Filament Fabrication (FFF)
- layer resolution: standard: 0.1 mm (maximum: 0.2 mm – minimum: 0.05 mm)
- build plate: 215 x 240 mm (8.46″ x 9.45″)
- build volume: 180 x 200 x 190 mm (7″ x 7.8″ x 7.5″)
- print speed: 30 mm/s – 120 mm/s
- travel speed: 30 mm/s – 300 mm/s
- build plate surface: Removable layer of BuildTak™ (consumable; also sold separately).
- filament diameter: 1.75 mm (accepts all filament spools with a mounting hole = 53 mm). Open filament policy.
- prints: PLA, ABS. Testing with other materials in progress.
- nozzle 1&2 diameter: 0.35mm. One nozzle supplied. Second nozzle optional.
- distance between nozzles: 23.7 mm
- maximum nozzle operating temperature: 260 °C
- Software:
- firmware: Modified Open Source Marlin 3D Printer. Firmware – user upgradable
- software: Repetier – CuraEngine – Slic3r (RepRap compatible)
- Hardware:
- dimensions: X Y Z 360 – 380 – 395 mm (14″ x 15″ x 15.5″) (without filament spools).
- frame: Polycarbonate panels and fibre reinforced molded ABS parts
- weight: 10 kg
- average noise level during operation: 52 dBA (at 1 m)
- ambient operation temperature: max 25 °C
- storage temperature: – 10 °C to + 40 °C
- Electrical:
- communication: USB 2.0 or SD card
- controller board: AVR ATmega2560 based. Dual head and heated bed capable.
- display: 4 x 20 char. blue LCD with white backlight
- AC input: 100 – 240 VAC 50-60Hz 150W max.
- Printing:
-
XT30 Female Connector (w/wire)
The XT30 Female to JST Male Connector allows you to connect a battery with XT30 plug an RC Vehicle or component set up with JST plug
-
XT30 Male Connector (w/wire)
This genuine Amass XT30 male connector is pre-soldered to a 10cm length of highly flexible 18AWG silicone wire. The gold-plated brass contacts are rated for a maximum current of 30A and will receive 18AWG wire.
Item Number: XT30M-10CM18AWG
Connector XT30 Male | Wire 18AWG | Length 10CM -
XT60 Female Connector (w/wire)
Key Specifications- Type: Female connector / plug
- Current Rating: 30A continuous
- Rated Voltage: Up to 500V DC (0.5kV)
- Contact Material: Gold-plated brass for low resistance and heat tolerance
- Body Material: Polyamide (Nylon) with a UL94V-0 flammability rating
- Wire Compatibility: Up to 12AWG
- Durability: Rated for up to 1,000 connection cycles
- Temperature Range: -20°C to 120°C
-
XT60 Male Connector (w/wire)
Key Specifications- Type: Male plug connector (2 pins)
- Current Rating: Handles up to 30A continuously, with peak or burst capacities up to 60A–65A
- Voltage Rating: Up to 500VDC (commonly used on 2S to 6S LiPo battery packs)
- Wire Compatibility: Up to 12 AWG wire size
- Material: Gold-plated brass contacts inside a high-temperature polyamide/nylon housing
- Durability: Rated for around 1,000 connection cycles
-
XT90 Female Connector (w/wire)
Key Specifications- Type: Female plug/connector (housing socket contacts for a male pin insertion)
- Current Rating: Typically handles up to 40A continuous current (varies by manufacturer/wire gauge)
- Voltage Rating: Rated up to 0.5kV / 500V
- Pins: 2 pins (positive and negative)
- Wire Size Compatibility: Designed for thick cables like 10AWG
- Temperature Range: -20°C to 120°C
- Durability: Approximately 1,000 connection/disconnection cycles
