-
Ethernet shield for Arduino
Specifications
- data rates up to 10 Mbps
- integrated MAC controller
- 8 kB Transmit / Receive Packet Dual Port Buffer
- the MAC controller supports both Unicast, Multicast and Broadcast packets, has a programmable (up to 64-byte) pattern matching feature within a packet at user defined offset and programmable wake-up on multiple packet formats (Magic Packet, Unicast, Multicast, Broadcast, specific packet match or any packet)
- uses pin 10 and 2 on an Arduino UNO™ board. It also uses the ICSP connector as a serial connection to the shield to free up I/O pins
- dimensions: 68 x 53mm / 2.67 x 2.08″
-
FC APC CONNECTORS
Avalon APC Fiber Connectors polishes the fiber at either an 8 or 9 degrees angle with a radius of curvature between 5 and 12mm. Through angle polishing the end of the fiber
-
FC APC COUPLER
Features
- Dust caps protect against debris and contamination
- Ceramic alignment sleeve provides precise alignment for APC applications
- Metal body ensures durability and long life
- Order online today!
- Used to connect simplex FC APC fiber cables
-
FC PC COUPLER- MULTIMODE
Specifications- Fiber optic connector prepared to be crimped into a 3.0mm diameter fiber optic cable.
- It is a black FC/PC multi-mode (MM) connector.
- Each connector is supplied in a single bag with all its parts: central ferrule, connector body and sleeve for the cable.
-
FINGERPRINT SENSOR ZFM-708
Specifications
- power: DC 3.8 V to 7.0 V
- back light: green
- baud rate: (9600 x N)bps, N=1-12 (default N=6)
- image acquiring time: <0.5 s
- finger prints storage capacity: 1000
- false acceptance rate: 0.001% (at security level 3)
- false reject rate: 1.0% (security level 3)
- interface: TTL serial
- operating current (max.): 95 mA
- average searching time: 1 s
- working temperature: -20 – +50 ?
- outline dimensions: 54 x 20 x 20.5 mm
-
GLASS PANEL FOR 3D PRINTER
Specifications
Product basic info Primary colours Transparent Additional colours Black Depth unit 21.5 cm Height unit 0.3 cm Width unit 21.5 cm Weight unit 397 g Material Glass -
Grabber, with magnetic end and mirror, 53 cm, stainless steel, metal
Physical properties Primary colour Grey Primary detailed colours Metal Depth unit 15 mm Height unit 245 mm Width unit 80 mm Weight unit 34 g Material Stainless steel Additional material Glass Maximum height 530 mm -
HALL (HOLZER) MAGNETIC SWITCH MODULE (2 pcs)
Specifications
- voltage: 5 VDC
- connection: 3 pins, +(middle pin), ground and S (data out)
- output (S): Schmitt Trigger, Active Low
- activation: 30 Gauss
- deactivation: 10 Gauss
- LED indicator: ON when activated
- dimensions: 25 x 15 mm
- weight: 2 g
-
Heat-resistant silicone repair and soldering mat with compartments, 350 x 250 mm, 500 C, non-slip, blue
Physical properties Primary colour Blue Depth unit 250 mm Height unit 4 mm Width unit 350 mm Weight unit 260 g Material Antistatic silicone
