-
CAT7 TOOLLESS CONNECTORS
Cable type: Ethernet
Suitable for RJ45 interface devices, applied to LAN work area, data communication , integrated wiring and etc.
RJ45 Cat7 plug tool-free suitable for Cat6A Cat7 installation cables.Cat7/CAT6A RJ45 Field Assembly Plug, Shielded. Supports Power over Ethernet -
CLAP ON/OFF SWITCH
Specifications
- relay power rating: 24VDC/AC 3A
- power supply: 12VDC / 150mA
- with DC adapter socket
- dimensions: 79 x 73 x 22mm / 3.1 x 2.9 x 0.9″
-
Complete kit with coaxial crimping tool and accessories, for perfect coaxial connections
Product basic info Primary colours Black Depth unit 60 mm Height unit 240 mm Width unit 310 mm Weight unit 1480 g -
Desoldering Pump Solder Sucker Solder Removal Tool
- Innovative Silicone Nozzle: Allows closer placement to soldering iron tip for better suction and removal.
- Heat Resistant Construction: Withstands direct contact with soldering iron up to 350C maximum.
- Compact One-Handed Design: Ergonomic design allows for easy operation with a single hand.
-
Desoldering pump, heating element, 30 W
Physical properties Primary colour Blue Additional colours Black Depth unit 26 cm Weight unit 242 g Material PVC (polyvinyl chloride) Additional material Metal Tip size 2 mm -
DISCRETE POWER AMPLIFIER 200 W
Specifications
- 200W music power @ 4 ohm load
- 100Wrms power @ 4 ohm load
- 70Wrms power @ 8 ohm load
- distortion: 0.02% @ 1KHz/10W
- damping factor: >800
- frequency response: 3Hz to 20KHz (-3dB)
- sensitivity: 0.6Vrms
- signal to noise ratio: 115dB
- power supply: 2 x 25-30Vac / 120VA
- PCB dimensions: 107x62mm (approx.)
- recommended heatsink: HSVM100: HEATSINK FOR K8060 (pre-drilled) or S44/75 (not drilled)
- recommended power transformer:
- 230VAC input, 2 x 30VAC output: 12030
- 115 / 230VAC input, 2 x 25VAC output: TR8040 (output power reduced by ±15%)
-
EDUCATIONAL LCD OSCILLOSCOPE
Specifications
- high contrast LCD: 64 x 128 pixels with white LED backlight
- maximum sample rate: 1MS/s for repetitive signals, 100kS/s in real time
- input amplifier bandwidth: 200kHz (-3 dB)
- measurements can be performed up to: 100kHz
- input impedance: 100kohm // 20pF
- maximum input voltage: 30Vpeak (AC + DC)
- input coupling: DC and AC
- AD resolution: 8 bits
- run modes: run, single
- trigger level adjustable: in 16 steps
- timebase range: in 15 steps, 10µs/division to 500ms/division
- input sensitivity range: in 6 steps, 100mV/division to 5V/division
- test output: 1.95kHz / 3.3Vpp
- full auto set up for: Volt/div and time/div (or manual)
- sensitivity down to 10mV
- readouts: DC, AC+DC, true RMS, dBm, Vpp, min. & max.
- time and voltage markers readout
- frequency readout (through markers)
- battery operated: 4 x AAA batteries (max. 100mA)
- power save mode
- dimensions: 80 x 115 x 40 mm / 3.14 x 4.52 x 1.57″
- weight: 190g (6.70 oz) with batteries
-
Electric Circuit Kits For Kids 8+
Specifications
Physical properties Battery IEC size AA (LR6, R6, FR6, HR6, KR6, ZR6 ,15A, 15D, 15LF, 1.2H2, 1.2K2, UM3, Pencil, MN1500, MX1500, MV1500) Primary colour Multi Depth unit 23 cm Height unit 5 cm Width unit 32.4 cm Weight unit 900 g Electrical Properties Battery voltage rating 1.5 V -
ELECTRIC PRECISION DRILL – 62 pcs
Specifications
- speed: 12000 rpm
- power supply: 12 VDC / 400 mA (adapter included)
-
ELECTRIC PRECISION DRILL & ENGRAVING SET – 66 pcs
Specifications
- speed: 8000-18000 rpm / with speed adjustment
- power supply: 230VAC/50Hz
- power consumption: 15W
-
ETHERNET RELAY CARD
Specifications
- 8 relay contacts: 12A @ 30Vdc or 16A @ 230Vac
- 1 input: dry contact or voltage input 5…20Vac or dc
- power supply: 12Vac or dc/500mA (option: TR-G3/8)
- diameter: 160 x 107mm
-
Ethernet shield for Arduino
Specifications
- data rates up to 10 Mbps
- integrated MAC controller
- 8 kB Transmit / Receive Packet Dual Port Buffer
- the MAC controller supports both Unicast, Multicast and Broadcast packets, has a programmable (up to 64-byte) pattern matching feature within a packet at user defined offset and programmable wake-up on multiple packet formats (Magic Packet, Unicast, Multicast, Broadcast, specific packet match or any packet)
- uses pin 10 and 2 on an Arduino UNO™ board. It also uses the ICSP connector as a serial connection to the shield to free up I/O pins
- dimensions: 68 x 53mm / 2.67 x 2.08″