-
Specifications
- 2.5 A (max.) output current (each channel)
- 50 V (max.) external power supply input
- used pins on an Arduino UNO board can be selected to accommodate for other stacked shields
- dimensions: 68 x 53mm / 2.67 x 2.08″
-
Specifications
- relay power rating: 24VDC/AC 3A
- power supply: 12VDC / 150mA
- with DC adapter socket
- dimensions: 79 x 73 x 22mm / 3.1 x 2.9 x 0.9″
-
Specifications
- dimensions: 30x20mm / 1.18 x 0.78″ (board)
- Voltage thresholds are (+/- 2%):
- RED: 5-10.9V battery low
- GREEN: 11 – 13.2V battery OK
- GREEN GLOW: 13.3 – 17.7V battery charging
- RED BLINK: 15.8 + battery NG or overcharging
-
Specifications
- power supply: 12-24 VDC
- relay contact: 16 A max.
- dimensions: 80 x 45 x 22 mm / 3.15 x 1.78 x 0.86″
-
Specifications
- hardware:
- USB connected and powered
- four DC coupled input channels
- input resistance: 1Mohm
- maximum samples per second: 100
- four input ranges: 3V / 6V / 15V and 30V
- sensitivity: 10mV
- accuracy: ± 3% of full scale
- maximum input: 30Vdc
- power and recording/diagnostic LED
- software:
- analogue trace or digital DVM readout
- 4 channels record simultaneously
- minimum / maximum sample hold function for DVM
- from 1 sec to 1000 sec per division
- storage and recall of screens (full colour) or data
- automatic recording option for long recordings
- on screen markers for time and voltage
- DLL included for your own developments
- system requirements:
- PC, running Win98SE or higher (does not work on WinNT or Win95)
- free USB port
- mouse
- CD-rom player
-
Specifications
- power supply for relays: 9-10Vac or 12 to 14Vdc (500mA), example: PS1205
- 8 high-power relays: 16A each (resistive load)
- dimensions: 160 x 107 x 30mm / 6.3 x 4.2 x 1.2″
-
Specifications
- regulated power supply: 9VDC (not incl.)
- power consumption: 300mA max.
- dimensions: 110 x 110 x 150 mm / 4.33 x 4.33 x 5.9″
-
Specifications
- 200W music power @ 4 ohm load
- 100Wrms power @ 4 ohm load
- 70Wrms power @ 8 ohm load
- distortion: 0.02% @ 1KHz/10W
- damping factor: >800
- frequency response: 3Hz to 20KHz (-3dB)
- sensitivity: 0.6Vrms
- signal to noise ratio: 115dB
- power supply: 2 x 25-30Vac / 120VA
- PCB dimensions: 107x62mm (approx.)
- recommended heatsink: HSVM100: HEATSINK FOR K8060 (pre-drilled) or S44/75 (not drilled)
- recommended power transformer:
- 230VAC input, 2 x 30VAC output: 12030
- 115 / 230VAC input, 2 x 25VAC output: TR8040 (output power reduced by ±15%)
-
Specifications
- suppression of radio & TV interference according to EN55015
- operating voltages: 110-125V or 220-240V AC (50/60Hz)
- max. load: 1000W/230V or 500W/115V (5A)
- max. phase shift with inductive load: 30°
- dimming speed: ± 5 sec.
- PCB dimensions: 90 x 75 x 40mm / 3.5 x 2.9 x 1.6″
- ambient temperature: 10°C to 40°C
-
Specifications
- power supply: 9 to 12V AC or DC / 100mA max.
- relay contacts NO / NC: 3A each
- 433MHz operation
- selectable timers per output: 0.5s, 5s, 30s, 1min, 5min, 15min, 30min and 60min
- open field range of up to 30m at room temperature
- NOTE: range can decrease in colder ambient conditions
- onboard antenna or external antenna
- dimensions: 100 x 82mm (3.9″ x 3.2″)
-
Specifications
- power supply: 3 x 1.5V AAA batteries
- up to 15 channels can be operated
- rubber keypad
- LED function indication
- compatible with most Velleman IR receiver kits
-
Specifications
- power supply: 8 ~ 14VDC or 2×6 ~ 2x12VAC (150mA)
- current consumption:
- all outputs off: 10mA
- all outputs on: 150mA
- dimensions: 71 x 114mm / 2.8 x 4.5″
