-
1S – 60H PULSE-PAUSE TIMER
Specifications
- power supply: 12-24 VDC
- relay contact: 16 A max.
- dimensions: 80 x 45 x 22 mm / 3.15 x 1.78 x 0.86″
-
4-CHANNEL RECORDER / LOGGER
Specifications
- hardware:
- USB connected and powered
- four DC coupled input channels
- input resistance: 1Mohm
- maximum samples per second: 100
- four input ranges: 3V / 6V / 15V and 30V
- sensitivity: 10mV
- accuracy: ± 3% of full scale
- maximum input: 30Vdc
- power and recording/diagnostic LED
- software:
- analogue trace or digital DVM readout
- 4 channels record simultaneously
- minimum / maximum sample hold function for DVM
- from 1 sec to 1000 sec per division
- storage and recall of screens (full colour) or data
- automatic recording option for long recordings
- on screen markers for time and voltage
- DLL included for your own developments
- system requirements:
- PC, running Win98SE or higher (does not work on WinNT or Win95)
- free USB port
- mouse
- CD-rom player
- hardware:
-
8-CHANNEL USB RELAY CARD
Specifications
- power supply for relays: 9-10Vac or 12 to 14Vdc (500mA), example: PS1205
- 8 high-power relays: 16A each (resistive load)
- dimensions: 160 x 107 x 30mm / 6.3 x 4.2 x 1.2″
-
3D LED CUBE 5 x 5 x 5 (white LED)
Specifications
- regulated power supply: 9VDC (not incl.)
- power consumption: 300mA max.
- dimensions: 110 x 110 x 150 mm / 4.33 x 4.33 x 5.9″
-
DISCRETE POWER AMPLIFIER 200 W
Specifications
- 200W music power @ 4 ohm load
- 100Wrms power @ 4 ohm load
- 70Wrms power @ 8 ohm load
- distortion: 0.02% @ 1KHz/10W
- damping factor: >800
- frequency response: 3Hz to 20KHz (-3dB)
- sensitivity: 0.6Vrms
- signal to noise ratio: 115dB
- power supply: 2 x 25-30Vac / 120VA
- PCB dimensions: 107x62mm (approx.)
- recommended heatsink: HSVM100: HEATSINK FOR K8060 (pre-drilled) or S44/75 (not drilled)
- recommended power transformer:
- 230VAC input, 2 x 30VAC output: 12030
- 115 / 230VAC input, 2 x 25VAC output: TR8040 (output power reduced by ±15%)
-
POWER DIMMER, PUSH-BUTTON CONTROLLED (1KW@230V)
Specifications
- suppression of radio & TV interference according to EN55015
- operating voltages: 110-125V or 220-240V AC (50/60Hz)
- max. load: 1000W/230V or 500W/115V (5A)
- max. phase shift with inductive load: 30°
- dimming speed: ± 5 sec.
- PCB dimensions: 90 x 75 x 40mm / 3.5 x 2.9 x 1.6″
- ambient temperature: 10°C to 40°C
-
2-CHANNEL RF REMOTE RECEIVER WITH RANDOM CODE
Specifications
- power supply: 9 to 12V AC or DC / 100mA max.
- relay contacts NO / NC: 3A each
- 433MHz operation
- selectable timers per output: 0.5s, 5s, 30s, 1min, 5min, 15min, 30min and 60min
- open field range of up to 30m at room temperature
- NOTE: range can decrease in colder ambient conditions
- onboard antenna or external antenna
- dimensions: 100 x 82mm (3.9″ x 3.2″)
-
15-CHANNEL IR TRANSMITTER
Specifications
- power supply: 3 x 1.5V AAA batteries
- up to 15 channels can be operated
- rubber keypad
- LED function indication
- compatible with most Velleman IR receiver kits
-
15-CHANNEL INFRARED RECEIVER
Specifications
- power supply: 8 ~ 14VDC or 2×6 ~ 2x12VAC (150mA)
- current consumption:
- all outputs off: 10mA
- all outputs on: 150mA
- dimensions: 71 x 114mm / 2.8 x 4.5″
-
7 W MONO AUDIO AMPLIFIER
Specifications
- music power output: 7W / 4ohm
- RMS output: 3.5W / 4ohm or 2W / 8ohm
- total harmonic distortion: 0.05% (1W / 1kHz)
- frequency response: 20Hz to 20kHz (-3dB)
- signal/noise ratio: 86dB (A weighted)
- input sensitivity: 40mV / 150Kohm
- overload and short-circuit protected
- supply voltage: 15VDC (8 to 18VDC possible) / 0.5A
- dimensions: 55 x 35mm / 2.2 x 1.4″
-
3 mm (1/8″) PLA FILAMENT – PURPLE – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: purple
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
1.75 mm (1/16″) PLA FILAMENT – RED – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 1.75 mm (1/16″)
- package: reel
- colour: red
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 350-360 m / 1,148-1,181 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″