“2 Pin Way Connector” was added to the compare list
-
Specifications KS20
・Number of Items：13
・Contents：NN-45, PR-15, PTS-01, Circuit testing driver with spare bits, Cutter knife
・Exterior Size ：L160×W90×H35mm
・Internal Size ：L155×W85×H30mm
・Weight ：600g
-
Specifications
- 200W music power @ 4 ohm load
- 100Wrms power @ 4 ohm load
- 70Wrms power @ 8 ohm load
- distortion: 0.02% @ 1KHz/10W
- damping factor: >800
- frequency response: 3Hz to 20KHz (-3dB)
- sensitivity: 0.6Vrms
- signal to noise ratio: 115dB
- power supply: 25-30Vac 120VA
- PCB dimensions: 107x62mm (approx.)
- recommended power transformer:
- 230VAC input, 2 x 30VAC output: 12030
- 115 / 230VAC input, 2 x 25VAC output: TR8040 (output power reduced by ±15%)
-
Specifications
- connector: 25 pins
- female
- for chassis mounting
- solder
-
Specifications
- connector: 25 pins
- male
- for chassis mounting
- solder
-
Specifications
| Physical properties |
| Primary colour |
White |
| Depth unit |
5.8 mm |
| Height unit |
14.8 mm |
| Width unit |
7.6 mm |
| Weight unit |
0.35 g |
| Material |
Nylon |
| Additional material |
Brass,Tin |
| Shape |
Flat |
-
Specifications
| Physical properties |
| Primary colour |
White |
| Additional colours |
Brown,Orange,Red |
| Depth unit |
12.9 mm |
| Height unit |
6.35 mm |
| Width unit |
7.6 mm |
| Weight unit |
2,5 g |
| Material |
Nylon |
| Additional material |
Brass,Tin |
| Wire length |
20 cm |
| Shape |
Flat |
-
Specifications
- power supply: 4 x AA batteries (LR6C not incl.)
- weight: 425g
- number of pieces: 148
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: black
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: green
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: light blue
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: luminous
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: purple
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
