-
Inspection mirror with telescopic Ø35mm
Manufacturer: ENGINEER
Manufacturer part number: SL-02
-
iPhone DISASSEMBLY TOOL FOR iPhone 4 & iPhone 4S
Specifications
- phone mounting brackets / screw hole markings are only for iPhone 4, other parts can also be used for iPhone 4S
- disassemble tool kit for iPhone 4
- contents:
- 1x: pentalobe screwdriver TS1
- 1x: Phillips screwdriver PH00
- 1x: suction cup opener
- 2x: plastic prying tool
- 1x: plectrum-shaped opening tool for opening the iPhone
- 1x: screw marking template
- 1x: SIM card ejector pin
- iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
-
IR REMOTE CONTROLLED DIMMER
Specifications
- max. load: 2A (4A with heat sink)
- supply voltage: 220VAC 50/60Hz (110VAC possible)
- transmitter / receiver distance: max. 7m (23′)
- not suitable for halogen lights
-
L298N DUAL BRIDGE DC & STEPPER MOTOR CONTROLLER BOARD
Specifications
- driver: L298N
- driver power supply: + 5 V to + 35 V
- driver output current (max.): 2A
- logic power output Vss: +5 V to +7 V (internal supply +5 V)
- logic current: 0-36 mA
- controlling level: low -0.3 V to 1.5 V, high: 2.3 V-Vss
- enable signal level: low -0.3 V to 1.5 V, high: 2.3 V-Vss
- max. power: 25 W
- working temperature: -25 to +130 °C ( -13 to 266 °F )
- dimensions: 69 x 56 x 36 mm ( 2.71 x 2.2 x 1.41″ )
-
LC APC CONNECTORS SINGLEMEODE
The LC APC fibre optic connector is a single mode 9/125μm OS1/OS2 simplex fibre connector, compatible with 250µm and 900µm optical fibres, and 0.9mm, 2mm, and 3mm cordage. Each connector with separate boot kits is available for 0.9 and 2.0mm diametre style cables and the length fixing device is to ensure stripping fibre in the right range. The field-installable connector is a factory pre-polished connector that eliminates the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fibre alignment, a factory pre-cleaved fibre stub, and a proprietary index-matching gel combine to offer an immediate low-loss termination. Each connector is colour-coded per industry-standard requirements to aid in identification during and after installation. It provides an ideal solution for optical cabling inside buildings and floors for LAN & CCTV applications and with the expansion of FTTH.
-
LC-LC DUPLEX COUPLER MULTIMODE
LC to LC Duplex Multi-Mode, Plastic Body with Flange, 10GIG OM3/OM4, Aqua Blue, SC Foot Print, Fiber Optic Adapter. The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle.
-
LC-LC DUPLEX COUPLER SINGLEMODE
Product Highlights
≤0.2dB(Typical) Low Insertion LossColor Coded for Rapid Fiber ManagementProtective Dust Cap Keeps Adapter’s Interior Clean from DustPlastic Buckle for Tool-less Snap-in InstallationAvailable in A Variety of Connector Types -
LCD & KEYPAD SHIELD FOR ARDUINO – LCD1602
Specifications
- dimensions: 80 x 58 x 20 mm
-
LED DESK LAMP WITH MAGNIFYING GLASS 3 + 12 DIOPTRE – 5W – 48 LEDS – WHITE
Specifications
- colour: cold white
- number of LEDs: 48 (not replaceable)
- intensity led: 2000 mcd/LED
- dioptre: 3 + 12 (magnification 1.75 + 4.00)
- colour LED: cold white
