-
LC APC CONNECTORS SINGLEMEODE
The LC APC fibre optic connector is a single mode 9/125μm OS1/OS2 simplex fibre connector, compatible with 250µm and 900µm optical fibres, and 0.9mm, 2mm, and 3mm cordage. Each connector with separate boot kits is available for 0.9 and 2.0mm diametre style cables and the length fixing device is to ensure stripping fibre in the right range. The field-installable connector is a factory pre-polished connector that eliminates the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fibre alignment, a factory pre-cleaved fibre stub, and a proprietary index-matching gel combine to offer an immediate low-loss termination. Each connector is colour-coded per industry-standard requirements to aid in identification during and after installation. It provides an ideal solution for optical cabling inside buildings and floors for LAN & CCTV applications and with the expansion of FTTH.
-
LC-LC DUPLEX COUPLER MULTIMODE
LC to LC Duplex Multi-Mode, Plastic Body with Flange, 10GIG OM3/OM4, Aqua Blue, SC Foot Print, Fiber Optic Adapter. The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle.
-
LC-LC DUPLEX COUPLER SINGLEMODE
Product Highlights
≤0.2dB(Typical) Low Insertion LossColor Coded for Rapid Fiber ManagementProtective Dust Cap Keeps Adapter’s Interior Clean from DustPlastic Buckle for Tool-less Snap-in InstallationAvailable in A Variety of Connector Types -
LED DESK LAMP WITH MAGNIFYING GLASS 3 + 12 DIOPTRE – 5W – 48 LEDS – WHITE
Specifications
- colour: cold white
- number of LEDs: 48 (not replaceable)
- intensity led: 2000 mcd/LED
- dioptre: 3 + 12 (magnification 1.75 + 4.00)
- colour LED: cold white
-
LED DIMMER WITH RF REMOTE CONTROL
Specifications
- power supply: 12-24VDC
- max. load: 6A
- LED PWM frequency: +/- 300Hz
- dimensions: +/- 80x70x23mm/3.1×2.8×0.9″
- remote:
- 433.92 MHz operation
- R&TTE compliant ( ETS 300-220)
- battery: 12V V23GA: ALKALINE MN21 V23A 12V-38mAh 4223.101.401 (1pc/bl) incl.
- dimensions: 63x40x16mm/2.5×1.6×0.6″
-
LED Light Loupe
Specifications
・Magnification：Main lens/ ×2, Bifocal lens/ ×4
・Lens Dia. ：φ95, φ25mm
・Light Source：16 bulbs bright LED
・Power Supply：AC100-240V, AA battery (4pcs.)
・Arm Length ：310mm
・Clamp Width ：2～65mm
・Weight ：593g -
M12 CONNECTOR MALE-FEMALE 4 PIN
Material Brass Telecom/Data/Network telecom Electrical Fitting easy Number Of Pins 4 pin Color nickel pelt type MRS -
M12 CONNECTOR MALE-FEMALE 5 PIN
M12 Field Wireable Connector,A Code,5Pin,Male+Female,Straight,For Cable,Screw-Joint,Unshield,IP67 Waterproof.
- Rated voltage: 250V
- Current per contact ( 40 °C ): Max 4A
- Temperature range ( Insulator / Wire ): -25 to 85°C / -30 to 80°C
- Protection Class: IP67 water resistant
- Locking type: Screw terminals
-
Magnifying lamp with light, 12 W magnifier lamp, 1.75x and 4x
Physical properties Primary colour White Primary detailed colours White Depth unit 19 cm Height unit 23 cm Width unit 28 cm Weight unit 1760 g -
Magnifying Lamp, 30 SMD-LEDs, 6 W, Dioptric 5, ideal for precision work, white
Product basic info Instruction manual languages Dutch, English, French, German, Polish, Portuguese, Spanish Primary colours White Depth unit 175 mm Height unit 345 mm Width unit 185 mm Weight unit 1400 g Material ABS Additional material Glass -
MOTOR & POWER SHIELD FOR ARDUINO
Specifications
- 2.5 A (max.) output current (each channel)
- 50 V (max.) external power supply input
- used pins on an Arduino UNO board can be selected to accommodate for other stacked shields
- dimensions: 68 x 53mm / 2.67 x 2.08″
