-
2-CHANNEL RF REMOTE RECEIVER WITH RANDOM CODE
Specifications
- power supply: 9 to 12V AC or DC / 100mA max.
- relay contacts NO / NC: 3A each
- 433MHz operation
- selectable timers per output: 0.5s, 5s, 30s, 1min, 5min, 15min, 30min and 60min
- open field range of up to 30m at room temperature
- NOTE: range can decrease in colder ambient conditions
- onboard antenna or external antenna
- dimensions: 100 x 82mm (3.9″ x 3.2″)
-
15-CHANNEL IR TRANSMITTER
Specifications
- power supply: 3 x 1.5V AAA batteries
- up to 15 channels can be operated
- rubber keypad
- LED function indication
- compatible with most Velleman IR receiver kits
-
15-CHANNEL INFRARED RECEIVER
Specifications
- power supply: 8 ~ 14VDC or 2×6 ~ 2x12VAC (150mA)
- current consumption:
- all outputs off: 10mA
- all outputs on: 150mA
- dimensions: 71 x 114mm / 2.8 x 4.5″
-
7 W MONO AUDIO AMPLIFIER
Specifications
- music power output: 7W / 4ohm
- RMS output: 3.5W / 4ohm or 2W / 8ohm
- total harmonic distortion: 0.05% (1W / 1kHz)
- frequency response: 20Hz to 20kHz (-3dB)
- signal/noise ratio: 86dB (A weighted)
- input sensitivity: 40mV / 150Kohm
- overload and short-circuit protected
- supply voltage: 15VDC (8 to 18VDC possible) / 0.5A
- dimensions: 55 x 35mm / 2.2 x 1.4″
-
3 mm (1/8″) PLA FILAMENT – PURPLE – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: purple
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
1.75 mm (1/16″) PLA FILAMENT – RED – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 1.75 mm (1/16″)
- package: reel
- colour: red
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 350-360 m / 1,148-1,181 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
3 mm (1/8″) PLA FILAMENT – YELLOW – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: yellow
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
3 mm (1/8″) PLA FILAMENT – LUMINOUS – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: luminous
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
3 mm (1/8″) PLA FILAMENT – GREEN – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: green
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
3 mm (1/8″) PLA FILAMENT – LIGHT BLUE – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: light blue
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
3 mm (1/8″) PLA FILAMENT – BLACK – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 3 mm (1/8″)
- package: reel
- colour: black
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 114-120 m / 374-393 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″
-
1.75 mm (1/16″) PLA FILAMENT – PINK – 1 kg / 2.2 lb
Specifications
- type: PLA
- diameter: 1.75 mm (1/16″)
- package: reel
- colour: pink
- density: 1.25 g/cm³ (@ 21.5 °C) / 0.045 lb/in³ (@ 70.7 °F)
- print temperature: 190-225 °C / 374-437 °F
- impact strength: 5 kJ/m² / 2.38 ft-lb/in²
- weight: 1 kg / 2.2 lb
- length: 350-360 m / 1,148-1,181 ft
- dimensions (reel): Ø 20 x 7 cm / Ø 8″ x 2.8″