“Desoldering Pump Solder Sucker Solder Removal Tool” was added to the compare list
-
Specifications
- breadboard dimensions: 80 x 60mm / 3.15″ x 2.36″
-
Specifications
- data rates up to 10 Mbps
- integrated MAC controller
- 8 kB Transmit / Receive Packet Dual Port Buffer
- the MAC controller supports both Unicast, Multicast and Broadcast packets, has a programmable (up to 64-byte) pattern matching feature within a packet at user defined offset and programmable wake-up on multiple packet formats (Magic Packet, Unicast, Multicast, Broadcast, specific packet match or any packet)
- uses pin 10 and 2 on an Arduino UNO™ board. It also uses the ICSP connector as a serial connection to the shield to free up I/O pins
- dimensions: 68 x 53mm / 2.67 x 2.08″
-
Specifications
- range: -20° ~ +70°C
- output: 0 ~ 20mA current loop
- output voltage compliance: 10V
- accuracy: 2° full range
- one single adjustment
- 3-wire system: GND, +V and OUT
- power supply: 12VDC for 0 ~ 5V OUT / 15VDC for 0 ~ 10V OUT
- current consumption: 30mA max.
- dimensions: 55 x 35 x 15mm / 2.2 x 1.4 x 0.6″
-
Specifications
- power supply: 12V DC
- consumption: max. 4A
- outputs: 12V DC / 400mA per channel (total : max 4A)
- dimensions: 140 x 100 x 27mm / 5.5 x 3.9 x 1.1″
-
Specifications
- power output: 750 mA continuous, (1 A peak)
- wide range AC – power input: 5 … 30 V
- 5 dry-contact inputs
- 1 logic open collector output
- power supply: 10 … 30 VAC
- dimensions: 117 x 65.5 x 25 mm / 4.6 x 2.58 x 0.98″
-
Specifications
- power supply for relays: 9-10Vac or 12 to 14Vdc (500mA), example: PS1205
- 8 high-power relays: 16A each (resistive load)
- dimensions: 160 x 107 x 30mm / 6.3 x 4.2 x 1.2″
-
Specifications
- 15 open collector outputs: 50V / 100mA
- LED indication for every output
- change-over or pulse contact: selectable per output
- power supply: 8 – 14VDC or 2 x 12VAC / 150mA
- PCB dimensions: 70 x 145mm (2.8″ x 5.7″)
- recommended housing: WCAH2851: PLASTIC BOX – BLACK 160 x 95 x 55 mm
- recommended transformer: 2120038M
- recommended adapter: PS1205
-
Specifications
- max. load: 2A (4A with heat sink)
- supply voltage: 220VAC 50/60Hz (110VAC possible)
- transmitter / receiver distance: max. 7m (23′)
- not suitable for halogen lights
-
Specifications
- transmitter / receiver range: up to 9m (29.5′)
- relay output: 240V / 5A (switch or pulse contact)
- supply voltage: 220VAC (110VAC possible)
- recommended housing: B6713
-
Specifications
- 2.5 A (max.) output current (each channel)
- 50 V (max.) external power supply input
- used pins on an Arduino UNO board can be selected to accommodate for other stacked shields
- dimensions: 68 x 53mm / 2.67 x 2.08″
-
Specifications
- relay power rating: 24VDC/AC 3A
- power supply: 12VDC / 150mA
- with DC adapter socket
- dimensions: 79 x 73 x 22mm / 3.1 x 2.9 x 0.9″
-
Specifications
- dimensions: 30x20mm / 1.18 x 0.78″ (board)
- Voltage thresholds are (+/- 2%):
- RED: 5-10.9V battery low
- GREEN: 11 – 13.2V battery OK
- GREEN GLOW: 13.3 – 17.7V battery charging
- RED BLINK: 15.8 + battery NG or overcharging
