“15-CHANNEL INFRARED RECEIVER” already exists in your wishlist
Specifications
breadboard dimensions: 80 x 60mm / 3.15″ x 2.36″
Specifications
high contrast LCD: 64 x 128 pixels with white LED backlight
maximum sample rate: 1MS/s for repetitive signals, 100kS/s in real time
input amplifier bandwidth: 200kHz (-3 dB)
measurements can be performed up to: 100kHz
input impedance: 100kohm // 20pF
maximum input voltage: 30Vpeak (AC + DC)
input coupling: DC and AC
AD resolution: 8 bits
run modes: run, single
trigger level adjustable: in 16 steps
timebase range: in 15 steps, 10µs/division to 500ms/division
input sensitivity range: in 6 steps, 100mV/division to 5V/division
test output: 1.95kHz / 3.3Vpp
full auto set up for: Volt/div and time/div (or manual)
sensitivity down to 10mV
readouts: DC, AC+DC, true RMS, dBm, Vpp, min. & max.
time and voltage markers readout
frequency readout (through markers)
battery operated: 4 x AAA batteries (max. 100mA)
power save mode
dimensions: 80 x 115 x 40 mm / 3.14 x 4.52 x 1.57″
weight: 190g (6.70 oz) with batteries
Specifications
breadboard dimensions: 80 x 60mm / 3.15″ x 2.36″
Specifications
experiment module can be powered via USB
power output to target is supported
indicator LEDs for power supply and programming mode
dimensions:
programming and learning module: 90 x 74 mm / 3.54 x 2.91″
programmer only: 34 x 74 mm / 1.34 x 2.91″
Specifications
200W music power @ 4 ohm load
100Wrms power @ 4 ohm load
70Wrms power @ 8 ohm load
distortion: 0.02% @ 1KHz/10W
damping factor: >800
frequency response: 3Hz to 20KHz (-3dB)
sensitivity: 0.6Vrms
signal to noise ratio: 115dB
power supply: 25-30Vac 120VA
PCB dimensions: 107x62mm (approx.)
recommended power transformer:
230VAC input, 2 x 30VAC output: 12030
115 / 230VAC input, 2 x 25VAC output: TR8040 (output power reduced by ±15%)
Specifications
TRANSMITTER:
power supply: 3 AAA batteries (not incl.) (option: TR-G3/8)
433 MHz operation
8 digitally encoded channels
rubber keypad
LED function/mode indication
dimensions: 150 x58 x 23 mm
FCC approved ID code: NLO8058
RELAY RECEIVER CARD:
8 high-quality relay contacts, 5A/230Vac max.
relay outputs are transient suppressed using VDR’s
LED confirmation on each relay contact
input power: 12 Vac / 500 mA
Specifications
suitable for SD and SDHC cards
tested up to 32GB cards
supports ID3 TAG information: Title, Artist Name, Album Name and Year are displayed on the 2-line 16 char. PC1602WRS-KWA-E: LCD 16×2 STN Grey Positive Transflective WHITE Backlight
supports folders to one level deep
up to 1024 folders, each containing up to 16384 songs
equalizer settings: Flat , Loudness, Heavy, Clear, Soft, Disco, Live and Hall
decodes MP3 (MPEG 1.0 & 2.0 audio layer III (CBR, VBR, ABR), Till 320kbit/s. Fraunhofer IIS and Thomson licensed
amplifier: 2x 5Wrms @ 4ohm
power supply: 12Vdc/1A
dimensions: 132 x 62mm / 5.2 x 2.45″
Specifications
power supply: 12-24VDC
max. load: 6A
LED PWM frequency: +/- 300Hz
dimensions: +/- 80x70x23mm/3.1×2.8×0.9″
remote:
433.92 MHz operation
R&TTE compliant ( ETS 300-220)
battery: 12V V23GA: ALKALINE MN21 V23A 12V-38mAh 4223.101.401 (1pc/bl) incl.
dimensions: 63x40x16mm/2.5×1.6×0.6″
Specifications
receiver:
power supply: 9 to 13Vac or 10 to 15Vdc
consumption : 130mA max. / 20mA standby (heating off)
relay contacts NO / NC: 5A (resistive load) each
433MHz operation
selectable timers per output: 0.5s, 5s, 30s, 1min, 5min, 15min, 30min and 60min
Heating option for use in cold environments
open field range of up to 30m possible
external antenna
dimensions: 80 x 70 x25mm / 3.15 x 2.75 x 0.98″
transmitter:
power supply: 12V battery (included)
V23GA: ALKALINE MN21 V23A 12V-38mAh 4223.101.401 (1pc/bl) / GP23GAC: ALKALINE V23A / EL12 12 V (5pcs/bl)
433MHz operation
dimensions: 63 x 40 x 16mm (2.5″ x 1.6″ x 0.6″)
Specifications
5 digital inputs (0= ground, 1= open) (on-board test buttons provided)
2 analogue inputs with attenuation and amplification option (internal test +5V provided)
8 digital open collector output switches (max 50V/100mA) (on-board LED indication)
2 analogue outputs:
0 to 5V, output resistance 1K5
PWM 0 to 100% open collector outputs max 100mA / 40V (on-board LED indication)
general respons time: 2ms per command
power supply: through USB approx. 70mA
dimensions: 110 x 80mm / 4.3 x 3.2″
Specifications
WS2812S LEDs
power supply: 5 VDC
current consumption: 3,5 A / panel max.
dimensions: 72 x 72 x 3 mm (2.8″ x 2.8″ x 0.1″)
LED pitch: 9 mm (0,35″)
Specifications
8 relay contacts: 12A @ 30Vdc or 16A @ 230Vac
1 input: dry contact or voltage input 5…20Vac or dc
power supply: 12Vac or dc/500mA (option: TR-G3/8)
diameter: 160 x 107mm
