“64 LED RGB MATRIX” was added to the compare list
-
Specifications
- power supply: 12-24VDC
- max. load: 6A
- LED PWM frequency: +/- 300Hz
- dimensions: +/- 80x70x23mm/3.1×2.8×0.9″
- remote:
- 433.92 MHz operation
- R&TTE compliant ( ETS 300-220)
- battery: 12V V23GA: ALKALINE MN21 V23A 12V-38mAh 4223.101.401 (1pc/bl) incl.
- dimensions: 63x40x16mm/2.5×1.6×0.6″
-
Specifications
- microcontroller: ATmega32u4
- operating voltage: 5 VDC
- input voltage (recommended): 7-12 VDC
- input voltage (limits): 6-20 VDC
- digital I/O pins: 20
- analogue input pins: 12
- PWM channels: 7
- DC current per I/O pin: 40 mA
- DC current for 3.3 V pin: 50 mA
- flash memory: 32 kB (ATmega32u4) of which 4 kB used by bootloader
- SRAM: 2.5 kB (ATmega32u4)
- EEPROM: 1 kB (ATmega32u4)
- clock speed: 16 MHz
- length: 68.6 mm
- width: 53.3 mm
- weight: 20 g
-
Specifications
- voltage: 3.3 to 5 VDC
- outputs: one analogue + one digital output
- fixation: 1 mounting screw hole 3 mm / 1.3″
- 2 indicator LEDs: 1 power indicator + 1 comparator output indicator
- frequency response: 50 Hz – 20 KHz
- impedance: 2.2 K Ohm
- sensitivity: 48 – 66 dB
- operating temperature: -40 to +85°C / -40 to 185° F
- dimensions: 44 x 15 x 10 mm / 1.73 x 0.59 x 0.39″
- weight: 4 g / 0.14 oz
-
Specifications
- voltage: 3.3 to 5 VDC
- outputs: one analogue + one digital output
- fixation: 1 mounting screw hole 3 mm / 1.3″
- 2 indicator LEDs: 1 power indicator + 1 comparator output indicator
- frequency response: 50 Hz – 20 KHz
- impedance: 2.2 K Ohm
- sensitivity: 48 – 66 dB
- operating temperature: -40 to +85°C / -40 to 185° F
- dimensions: 44 x 15 x 10 mm / 1.73 x 0.59 x 0.39″
- weight: 4 g / 0.14 oz
-
Specifications
- operating voltage: 3 to 5 VDC
- max. load voltage: 0 to 24 VDC
- input: SIG pin, logic level 3 to 5 VDC
- max. load current: 5 A (a heatsink is required for loads > 1 A)
- used MOSFET: IRF520
- dimensions: 34 x 21 x 16 mm
-
Specifications
- 2.5 A (max.) output current (each channel)
- 50 V (max.) external power supply input
- used pins on an Arduino UNO board can be selected to accommodate for other stacked shields
- dimensions: 68 x 53mm / 2.67 x 2.08″
-
Specifications
- suitable for SD and SDHC cards
- tested up to 32GB cards
- supports ID3 TAG information: Title, Artist Name, Album Name and Year are displayed on the 2-line 16 char. PC1602WRS-KWA-E: LCD 16×2 STN Grey Positive Transflective WHITE Backlight
- supports folders to one level deep
- up to 1024 folders, each containing up to 16384 songs
- equalizer settings: Flat , Loudness, Heavy, Clear, Soft, Disco, Live and Hall
- decodes MP3 (MPEG 1.0 & 2.0 audio layer III (CBR, VBR, ABR), Till 320kbit/s. Fraunhofer IIS and Thomson licensed
- amplifier: 2x 5Wrms @ 4ohm
- power supply: 12Vdc/1A
- dimensions: 132 x 62mm / 5.2 x 2.45″
-
Specifications
- suppression of radio & TV interference according to EN55015
- operating voltages: 110-125V or 220-240V AC (50/60Hz)
- max. load: 1000W/230V or 500W/115V (5A)
- max. phase shift with inductive load: 30°
- dimming speed: ± 5 sec.
- PCB dimensions: 90 x 75 x 40mm / 3.5 x 2.9 x 1.6″
- ambient temperature: 10°C to 40°C
-
Specifications
- audio sample frequency: 8 kHz
- uses pin 10 on an Arduino® UNO board as a Chip Select
- uses the ICSP pins on an Arduino as a serial connection to the shield to free up I/O pins
- memory write up to 100.000 X
- dimensions: 80 x 55 x 30 mm / 3.15 x 2.16 x 1.18″
-
Specifications
- dimensions: 90 x 125 x 100 mm / 3.5 x 4.9 x 3.9″
- power supply:
- mechanical: 2 x 1.5 V AA batteries (not incl.)
- electronic: 9 V battery (not incl.)
- number of pieces: 103
-
Specifications
- voltage: 3.3 V – 5 V
- protocol: SPI
- dimensions: 52 x 30 x 12 mm
- weight: 8 g
- required library: SD.h
-
Specifications
| Physical properties |
| Primary colour |
Blue |
| Additional colours |
Yellow,Grey |
| Weight unit |
745 g |
| Material |
Plastic + PS/LED |
