“8-CHANNEL USB RELAY CARD” already exists in your wishlist
Specifications
power supply: 12-24VDC
max. load: 6A
LED PWM frequency: +/- 300Hz
dimensions: +/- 80x70x23mm/3.1×2.8×0.9″
remote:
433.92 MHz operation
R&TTE compliant ( ETS 300-220)
battery: 12V V23GA: ALKALINE MN21 V23A 12V-38mAh 4223.101.401 (1pc/bl) incl.
dimensions: 63x40x16mm/2.5×1.6×0.6″
Specifications
microcontroller: ATmega32u4
operating voltage: 5 VDC
input voltage (recommended): 7-12 VDC
input voltage (limits): 6-20 VDC
digital I/O pins: 20
analogue input pins: 12
PWM channels: 7
DC current per I/O pin: 40 mA
DC current for 3.3 V pin: 50 mA
flash memory: 32 kB (ATmega32u4) of which 4 kB used by bootloader
SRAM: 2.5 kB (ATmega32u4)
EEPROM: 1 kB (ATmega32u4)
clock speed: 16 MHz
length: 68.6 mm
width: 53.3 mm
weight: 20 g
Specifications
voltage: 3.3 to 5 VDC
outputs: one analogue + one digital output
fixation: 1 mounting screw hole 3 mm / 1.3″
2 indicator LEDs: 1 power indicator + 1 comparator output indicator
frequency response: 50 Hz – 20 KHz
impedance: 2.2 K Ohm
sensitivity: 48 – 66 dB
operating temperature: -40 to +85°C / -40 to 185° F
dimensions: 44 x 15 x 10 mm / 1.73 x 0.59 x 0.39″
weight: 4 g / 0.14 oz
Specifications
voltage: 3.3 to 5 VDC
outputs: one analogue + one digital output
fixation: 1 mounting screw hole 3 mm / 1.3″
2 indicator LEDs: 1 power indicator + 1 comparator output indicator
frequency response: 50 Hz – 20 KHz
impedance: 2.2 K Ohm
sensitivity: 48 – 66 dB
operating temperature: -40 to +85°C / -40 to 185° F
dimensions: 44 x 15 x 10 mm / 1.73 x 0.59 x 0.39″
weight: 4 g / 0.14 oz
Specifications
operating voltage: 3 to 5 VDC
max. load voltage: 0 to 24 VDC
input: SIG pin, logic level 3 to 5 VDC
max. load current: 5 A (a heatsink is required for loads > 1 A)
used MOSFET: IRF520
dimensions: 34 x 21 x 16 mm
Specifications
2.5 A (max.) output current (each channel)
50 V (max.) external power supply input
used pins on an Arduino UNO board can be selected to accommodate for other stacked shields
dimensions: 68 x 53mm / 2.67 x 2.08″
Specifications
suitable for SD and SDHC cards
tested up to 32GB cards
supports ID3 TAG information: Title, Artist Name, Album Name and Year are displayed on the 2-line 16 char. PC1602WRS-KWA-E: LCD 16×2 STN Grey Positive Transflective WHITE Backlight
supports folders to one level deep
up to 1024 folders, each containing up to 16384 songs
equalizer settings: Flat , Loudness, Heavy, Clear, Soft, Disco, Live and Hall
decodes MP3 (MPEG 1.0 & 2.0 audio layer III (CBR, VBR, ABR), Till 320kbit/s. Fraunhofer IIS and Thomson licensed
amplifier: 2x 5Wrms @ 4ohm
power supply: 12Vdc/1A
dimensions: 132 x 62mm / 5.2 x 2.45″
Specifications
suppression of radio & TV interference according to EN55015
operating voltages: 110-125V or 220-240V AC (50/60Hz)
max. load: 1000W/230V or 500W/115V (5A)
max. phase shift with inductive load: 30°
dimming speed: ± 5 sec.
PCB dimensions: 90 x 75 x 40mm / 3.5 x 2.9 x 1.6″
ambient temperature: 10°C to 40°C
Specifications
audio sample frequency: 8 kHz
uses pin 10 on an Arduino® UNO board as a Chip Select
uses the ICSP pins on an Arduino as a serial connection to the shield to free up I/O pins
memory write up to 100.000 X
dimensions: 80 x 55 x 30 mm / 3.15 x 2.16 x 1.18″
Specifications
dimensions: 90 x 125 x 100 mm / 3.5 x 4.9 x 3.9″
power supply:
mechanical: 2 x 1.5 V AA batteries (not incl.)
electronic: 9 V battery (not incl.)
number of pieces: 103
Specifications
voltage: 3.3 V – 5 V
protocol: SPI
dimensions: 52 x 30 x 12 mm
weight: 8 g
required library: SD.h
Specifications
Physical properties
Primary colour
Blue
Additional colours
Yellow,Grey
Weight unit
745 g
Material
Plastic + PS/LED
